• Dr. A. Ramachandra, P. Prasad, K. Chandrashekara, & Manjunath “Condition monitoring of Single point Cutting tool during turning of AI-Si-Sic composite using vibration technique” Accepted for publication at National Conference on Recent trends in condition monitoring of machinery on 4-5 March 2002, NIMAM Institute of technology – Nitte-574110.
• Dr. A. Ramachandra, A.N. Hari Rao, & Nitin. R. Wali “Experimental Studies on Water Laminated Journal Bearing for Different Groove Configurations” Accepted International Conference on Industrial Tribology-2001, to be held at 8-11 April 2002, at TATA Steel, Jamshedpur.
• Dr. A. Ramachandra, A.N. Hari Rao, K. Chandrashekar & “Flow Defection using ultrasonic” Accepted National seminar to be held at NIITE, during 3-5 March 2001.
• Dr. A. Ramachandra, “Condition Monitoring of Machinery”, Proc. of National Conference on Recent trends in Condition Monitoring of Machines, pp. 1, 4-5 March 2002, NITTE.
• Dr. A. Ramachandra, “Wear Analysis of Single point cutting tool during turning of Aluminium-Silicon-Silicon-Carbide composite using Acoustic Emission Technique”, Proc. of National Conference on Recent trends in Condition Monitoring of Machines, pp. 24, 4-5 March 2002, NITTE.
• Dr. A. Ramachandra, “Introduction to Maintenance Management”, Proc. of National Conference on Recent trends in Condition Monitoring of Machines, key note address, 4-5 March 2002, NITTE.
• Dr. A. Ramachandra, “Studies on monitoring of Antrfriction Bearing”, Proc. of National Conference on Recent trends in Condition Monitoring of Machines, pp. 52, 4-5 March 2002, NITTE.
• Dr. A. Ramachandra, “Wear Analysis of single point cutting tool during turning of Aluminium-Silicon-Siliconn-Carbide composite using vibration measurement technique”, Proc. of National Conference on Recent trends in Condition Monitoring of Machines, pp. 93, 4-5 March 2002, NITTE.
• Dr. A. Ramachandra, “Experimental and Analytical Analysis of axial and double axial water lubricated journal bearings”, Proc. of National Conference on Recent trends in Condition Monitoring of Machines, pp. 108, 4-5 March 2002, NITTE.
• Dr. A. Ramachandra, “Application of Wavelet Theory in Vibration Analysis”, Proc. of National Conference on Recent trends in Condition Monitoring of Machines, pp. 127, 4-5 March 2002, NITTE.
• Dr. A Ramachandra, “Flaw Detection of materials using ultrasonic method”, Proc. of National Conference on Recent trends in Condition Monitoring of Machines, pp. 159, 4-5 March 2002, NITTE.
• Dr. A. Ramachandra, “Effect of chills on the Structure, Mechanical properties and wear characteristics of commercial Aluminium 12% Silicon alloy casting”, Proc. of National Conference on Recent trends in Condition Monitoring of Machines, 4-5 March 2002, NITTE.
• Dr. A. Ramachandra, “Tribological characteristics of extruded Al 6061-5wt% SiC composites”, Proc. of International Conference on Manufacturing, Dhaka, pp. 14, Vol. 2, Aug 3-10 2002.
• Dr. A. Ramachandra, “Heat Treatment of Al 6061 – SiC composites”, Proc. of International Conference on Manufacturing, Dhaka, pp. 21, Vol. 2, Aug. 3-10 2002.
• N.S. Mohan, Dr. A. Ramachandra and S.M. Kulkarni, “Influence of various specimen parameter on Honeycomb sandwich composite panel on natural frequency”, Proc. of National Conference on world class manufacturing, Amrita Institute of Technology, Coimbatore, pp. 122 – 127.
• M. Amarnath, R. Srinidhi, Dr. A. Ramachandra and S.B. Kandagul, “Prediction of defects in Antifriction bearings using vibration signal analysis, Journal of Institution of Engineering (Mechanical Engineering), Sept. 2003, pp. 117 – 124.
• Dr. A. Ramachandra, “Design and Manufacture of Products of Polymer based Composite Materials”, National Seminar on ‘Recent Trends in Liquid Crystals Polymers and Composite Materials at Ghousia College of Engineering, Ramanagaram, Sept. 2003.
• Dr. A. Ramachandra, “Wood gas as an alternative fuel to internal combustion engines”, Proceedings of National conference on ‘Advances in Mechanical Engineering', organised at J.N.N. college of engineering, Shimoga, 11- 14 February 2004.
• Dr. A. Ramachandra, “Health monitoring of machinery”, Proceedings of National conference on ‘Advances in Mechanical Engineering', organised at J.N.N. college of engineering, Shimoga, 11-14 February 2004.
• C.S. Ramesh, S.K. Sheshadri & K.J.L Iyer, “Wear resistance of nickel fly ash composite coatings”, Wear 145 (1991), p 189.
• C.S. Ramesh, S.K. Sheshadri & K.J.L Iyer, “A Survey of aspects of wear of Metals”, Indian J. Technol. 29 (1991) p 179.
• C.S. Ramesh, S.K. Sheshadri & K.J.L Iyer, “Corrosion studies on nickel silicon nitride composite coatings”, Surf. Engg.7 (3) (1992), p 216.
• C.S. Ramesh, S.K. Sheshadri & K.J.L Iyer, “Wear resistant nickel silicon nitride electro composite coatings”, Ceramic Trans. Advanced Composite Materials, 19 (1991), p 885.
• C.S. Ramesh, S. K. Sheshadri & K.J.L Iyer, Ceramic Trans. Advanced Composite Materials, 19(1991), p 985.
• C.S. Ramesh, S.K. Sheshadri & K.J.L Iyer, “A model for wear rates of composite coatings”, Wear, 156 (1992), p 20.
• C.S. Ramesh, S.K. Sheshadri & K.J.L Iyer, “Fatigue behaviour of nickle-fly ash composite coatings”, J. Mat. Sc. Letters, (1994), p 746.
• C.S.Ramesh and Mir Safiulla, “ Friction and Wear behavior of rolled Al-12.5%Si-10%wt TiO 2 Composite Proc. National Seminar on future trends in Mechanical Engineering, Roorkee, (Sept. 2000) p 88.
• M.S Bhagyashekar, C.S Ramesh, A. Ramachandra & K. Chandrashekhara, “ Wear Characteristics of H.S.S. cutting tool” during Turning of Aluminium Alloy – SiC Composites “ Annual Technical Meeting, Indian Institute of Metals, Bangalore, Nov. 1998.
• A.R. Anwar Khan C.S. Ramesh and Ramachandra, “Heat treatment of Al-6061-10wt. %SiC composites”, Proc. International conference, on Manufacturing, Dhaka, Aug. (2002), p 21.
• C.S. Ramesh, A.R. Anwar Khan and Mir Safiulla, “Wear and Corrosion behavior of Al 6061-TiO 2 composites”, Material Science Forum Journal and presented at International conference in Singapore Dec. (2002) p 317.
• Mir Safiulla, C.S. Ramesh and A. Ramachandra, “ Tribological characteristics of extruded Al 6061 – 5wt% SiC composites”, Proc. Of International conference on manufacturing, Dhaka, Aug. (2002), p 14.
• R. Noor Ahmed, Martin Jaberaj and C.S. Ramesh,” Effect of Melting and Moulding conditions on impurity level of cast Copper”, Proc. National Conference, J.N.T.U., Ananthapur, Oct. (2002).
• R. Noor Ahmed, C.S. Ramesh and Seetharam, “Mechanical properties of cast Cu-SiC-Gr Hybrid composite”, Proc. National Conference, J.N.T.U., Ananthapur, Oct. (2001), p 270.
• R.Noor Ahmed and C.S. Ramesh, “Wear and corrosion properties of cast copper silicon carbide graphite hybrid composites”, Proc. National Conference, Bharath Engineering College, Chennai, Dec, (2002).
• Mohamed Haneef, Nayab Alam & N. Govindraju, “Stress concentration factor in laminated composite structure”, Proc. International Conference on Manufacturing, Dhaka, Aug (2002), p 337
• Mohamed Haneef & N.Govindraju “Stress analysis of pin joints in laminated composites structures”, Proc. International Conference on Manufacturing Dhaka, Aug (2002), p 363.
• Mohamed Haneef & N. Govindraju “A study of pin joints in laminated composites structure”, Material Science Forum Journal and presented at International conference in Singapore, Dec. (2002), p 329.
• M.S. Bhagyashekar, C.S. Ramesh, A. Ramachandra & K. Chandrashekhara, “Wear Characteristics of H.S.S. Cutting tool during Turning Operation of Aluminium alloy SiC/Gr Composites”, Proc. Of 2nd International Conference on Industrial Tribology, Hydrabad, (Dec 1999), p 306.
• Mohamed Haneef, N.Govindraju & Hilal Asdaque, “Finite Element analysis of fastener joints in metallic and orthotropic structures” Material Science Forum Journal and presented at International conference in Singapore, Dec. (2002) p 396.
• K.S. Nagendra, B.K. Muralidhara & K. Radhakrishna, “Effect of Chills on structure and Mechanical Properties of commercially available Al-12.5 Si alloy”, Proc. National Conference of 52 ATM., Indian Institute of Metals, I.I.Sc., Bangalore Nov. 1998.
• M.S. Bhagyashekar, C.S. Ramesh, A. Ramachandra “Surface Roughness studies on Al-12.5% Si alloy-
• Dr. C.S. Ramesh, Mir Safiulla, “Comparative studies on cold extrusion of Al 6061-Si 3 N 4 / SiC cast composites”, Proc. of National conference on Advanced trends in Mechanical Engineering, Research and Development, Oct. 2001.
• K. Kumar, C.S. Ramesh, K. Ramachandra & Shiva Rudraiah, “ Linear 3D analysis of Gas Turbine Engine Shaft using ANSYS code”, Proc. Of 2 nd International Conference on Manufacturing, Dhaka, Aug. (2002), p 274.
• K. Kumar & M. Venkatramana Reddy, “ Comparative study of cracks in standard test specimens”, Proc. of National Conference on recent trends in Mechanical Engineering, JNTU, Hyderabad, Dec. (2002) p 276.
• K. Kumar & Kishore Hoysala, “Application of Latin Square Design – a case study”, International O.R. Conference (OR99), Tirupathi, Dec. (1999).
• Sarfaraz, K. Kumar, M. Venkataramana Reddy, C.S. Ramesh, “ CAD/CAM & CAE Simulation of Manufacturing process, Nat. Conf. on Emerging Trends in Manufacturing Technology and Management, ISTE Chapter, Adhiyaman Engineering College, Hosur, (Sept. 2003).
• K. Kumar et. al, “Study of Fracture Parameter of a Pressure Vessel subjected to Internal Pressure”, Nat. Conf. on Emerging Trends in Manufacturing Technology and Management, ISTE Chapter, Adhiyaman Engineering College, Hosur, (Sept. 2003).
• K. Kumar et.al, “Study of Vibration Characteristics of a 3 Rotor System using FEM & Comparing it with Holzer and Stodola Method”, Nat. Conf. on Emerging Trends in Manufacturing Technology and Management, ISTE Chapter, Adhiyaman Engineering College, Hosur, (Sept. 2003).
• K. Kumar et. al, “Fillet optimization of a stepped shaft subjected to bending and axial force”, Nat. Conf. on Emerging Trends in Manufacturing Technology and Management, ISTE Chapter, Adhiyaman Engineering College, Hosur, (Sept. 2003).
• K. Kumar et. al, “Influence of taper, twist and thickness in rotor blades using FEA”, Nat. Conf. on Emerging Trends in Manufacturing Technology and Management, ISTE Chapter, Adhiyaman Engineering College, Hosur, (Sept. 2003).
• Dr. C.S. Ramesh, “Processing and Characterization of Metal Matrix Composites”, National Seminar on Recent Trends in Liquid Crystals, Polymers and Composite Materials, at Ghousia College of Engineering, Ramanagaram, (Sept. 2003).
• Mohamed Haneef, “Laminated Composite Materials – An Overview”, National Seminar on Recent Trends in Liquid Crystals, Polymers and Composite Materials, at Ghousia College of Engineering, Ramanagaram, (Sept. 2003).
• Dr. A. Ramachandra, “Design and Manufacture of Products of Polymer based Composite Materials”, National Seminar on Recent Trends in Liquid Crystals, Polymers and Composite Materials, at Ghousia College of Engineering, Ramanagaram, (Sept. 2003).
• Dr. C.S. Ramesh & M.N. Dube, “Abrasion Wear Resistance of Al 6061-5wt.%SiC Composite”, National Seminar on Recent Trends in Liquid Crystals, Polymers and Composite Materials, at Ghousia College of Engineering, Ramanagaram, (Sept. 2003).
• K.S. Nagendra, “Tribological characteristics of Boronised Mild Steel”, Proceedings of National conference on ‘Advances in Mechanical Engineering', organised at J.N.N. college of engineering, Shimoga, 11-14 February 2004.
• M.S. Bhagyashekar, “Machinability of metal matrix composites”, Proceedings of National conference on ‘Advances in Mechanical Engineering', organised at J.N.N. college of engineering, Shimoga, 11-14 February 2004.
• Mohammed Mohsin Ali H., “Evaluation of stress correction factors for flexural curved beams using FEM/NISA”, Proceedings of National conference on ‘Advances in Mechanical Engineering', organised at J.N.N. college of engineering, Shimoga, 11-14 February 2004.
• Mohammed Mohsin Ali H., “Recent developments in Bio Materials”, Proceedings of National conference on ‘Advances in Mechanical Engineering', organised at J.N.N. college of engineering, Shimoga, 11-14 February 2004.
• S. Raghavendra Rao, “Optimisation of Hammer blows in drop forging process”, Proceedings of National conference on ‘Advances in Mechanical Engineering', organised at J.N.N. college of engineering, Shimoga, 11- 14 February 2004.
• Mohamed Khaisar, “Condition monitoring of single point cutting tool using vibration monitoring technique for haemotite re-inforced aluminium metal matrix composites”, Proceedings of International conference on ‘Responsive supply chain and organisational competitiveness (RSC-2004)', organised by CIT, Coimbatore jointly with Masschussetes University, U.S.A, during 5-7 January 2004.
• K. Kumar et. al, “Retrival of J – Integral for inclined crack, sub surface crack and center through crack by using FEA”, Nat. Conf. on Emerging Trends in Manufacturing Technology and Management, ISTE Chapter, Adhiyaman Engineering College, Hosur, (Sept. 2003).